IMPORTANT: The customer photos and information provided on this website have not been verified to be correct or valid installations by Hydrophase LLC. They are provided as a reference only. Always follow the Hydrophase Installation Guide, and contact Hydrophase LLC with any questions.
Amazing system, simple to install. Approx. 4 hours start to finish.
It took me a bit longer, but I was very picky about neatly running wires along the factory routes.
Instructions were easy to follow and online video and install pics helped a ton - especially for mounting location ideas for various items including the LCD display.
On my 212X, which has ballast tanks in the rear on both port and starboard sides, I was concerned about puncturing the tanks with the supplied screws. I ended up using 1/2" SS screws for mounting the throttle nodes - they worked great!
Working behind the helm can be tight - I recommend pulling the ignition panel completely out - or hiring a flexible 7 year old to run wires and zip ties, as seen in my pics - 7 year old not included ; )
-S.B., Groton, Massachusetts, USA